Pulsed‐Laser Deposition of Barium Titanate Thin Films

M. Grant Norton; Kathryn P.B. Cracknell; C. Barry Carter

doi:10.1111/j.1151-2916.1992.tb07234.x

Pulsed‐Laser Deposition of Barium Titanate Thin Films

M. Grant Norton
, Kathryn P.B. Cracknell
, C. Barry Carter

Research output: Contribution to journal › Article › peer-review

44 Scopus citations

Abstract

Barium titanate (BaTiO3) thin films have been deposited on single‐crystal magnesia (MgO) substrates by pulsed‐laser ablation. Temperature dependence of capacitance measurements show a peak of 110°C, indicative that a ferroelectric phase transition has occurred at this temperature. This value is lower than that determined for single‐crystal BaTiO3, but consistent with that found for BaTiO3 thin films produced by other methods. It has been demonstrated that the microstructure of the films can be varied by changes in the deposition parameters. Optimizing these variations permits the formation of thin films with controlled microstructures and properties. Copyright © 1992, Wiley Blackwell. All rights reserved

Original language	English
Pages (from-to)	1999-2002
Number of pages	4
Journal	Journal of the American Ceramic Society
Volume	75
Issue number	7
DOIs	https://doi.org/10.1111/j.1151-2916.1992.tb07234.x
State	Published - Jan 1 1992
Externally published	Yes

Access to Document

10.1111/j.1151-2916.1992.tb07234.x

Cite this

@article{160a5e0fe28843adbdcc2ca9e9905662,

title = "Pulsed‐Laser Deposition of Barium Titanate Thin Films",

abstract = "Barium titanate (BaTiO3) thin films have been deposited on single‐crystal magnesia (MgO) substrates by pulsed‐laser ablation. Temperature dependence of capacitance measurements show a peak of 110°C, indicative that a ferroelectric phase transition has occurred at this temperature. This value is lower than that determined for single‐crystal BaTiO3, but consistent with that found for BaTiO3 thin films produced by other methods. It has been demonstrated that the microstructure of the films can be varied by changes in the deposition parameters. Optimizing these variations permits the formation of thin films with controlled microstructures and properties. Copyright {\textcopyright} 1992, Wiley Blackwell. All rights reserved",

author = "Norton, \{M. Grant\} and Cracknell, \{Kathryn P.B.\} and Carter, \{C. Barry\}",

year = "1992",

month = jan,

day = "1",

doi = "10.1111/j.1151-2916.1992.tb07234.x",

language = "English",

volume = "75",

pages = "1999--2002",

journal = "Journal of the American Ceramic Society",

issn = "0002-7820",

publisher = "Wiley-Blackwell",

number = "7",

}

TY - JOUR

T1 - Pulsed‐Laser Deposition of Barium Titanate Thin Films

AU - Norton, M. Grant

AU - Cracknell, Kathryn P.B.

AU - Carter, C. Barry

PY - 1992/1/1

Y1 - 1992/1/1

N2 - Barium titanate (BaTiO3) thin films have been deposited on single‐crystal magnesia (MgO) substrates by pulsed‐laser ablation. Temperature dependence of capacitance measurements show a peak of 110°C, indicative that a ferroelectric phase transition has occurred at this temperature. This value is lower than that determined for single‐crystal BaTiO3, but consistent with that found for BaTiO3 thin films produced by other methods. It has been demonstrated that the microstructure of the films can be varied by changes in the deposition parameters. Optimizing these variations permits the formation of thin films with controlled microstructures and properties. Copyright © 1992, Wiley Blackwell. All rights reserved

AB - Barium titanate (BaTiO3) thin films have been deposited on single‐crystal magnesia (MgO) substrates by pulsed‐laser ablation. Temperature dependence of capacitance measurements show a peak of 110°C, indicative that a ferroelectric phase transition has occurred at this temperature. This value is lower than that determined for single‐crystal BaTiO3, but consistent with that found for BaTiO3 thin films produced by other methods. It has been demonstrated that the microstructure of the films can be varied by changes in the deposition parameters. Optimizing these variations permits the formation of thin films with controlled microstructures and properties. Copyright © 1992, Wiley Blackwell. All rights reserved

UR - https://www.scopus.com/pages/publications/0345884253

U2 - 10.1111/j.1151-2916.1992.tb07234.x

DO - 10.1111/j.1151-2916.1992.tb07234.x

M3 - Article

SN - 0002-7820

VL - 75

SP - 1999

EP - 2002

JO - Journal of the American Ceramic Society

JF - Journal of the American Ceramic Society

IS - 7

ER -

Pulsed‐Laser Deposition of Barium Titanate Thin Films

Abstract

Access to Document

Fingerprint

Cite this