Surface preparation methods to enhance dynamic surface property measurements of shocked metal surfaces

M. B. Zellner; W. Vogan McNeil; George Thompson Gray; D. C. Huerta; N. S.P. King; G. E. Neal; Scott J Valentine; Jeremy Ronald Payton; Jim Rubin; G. D. Stevens; W. D. Turley; William Tillman Buttler

doi:10.1063/1.2906107

Surface preparation methods to enhance dynamic surface property measurements of shocked metal surfaces

M. B. Zellner
, W. Vogan McNeil
, George Thompson Gray
, D. C. Huerta
, N. S.P. King
, G. E. Neal
, Scott J Valentine
, Jeremy Ronald Payton
, Jim Rubin
, G. D. Stevens
, W. D. Turley
, William Tillman Buttler

Los Alamos National Laboratory

Research output: Contribution to journal › Article › peer-review

65 Scopus citations

Abstract

This effort investigates surface-preparation methods to enhance dynamic surface-property measurements of shocked metal surfaces. To assess the ability of making reliable and consistent dynamic surface-property measurements, the amount of material ejected from the free surface upon shock release to vacuum (ejecta) was monitored for shocked Al-1100 and Sn targets. Four surface-preparation methods were considered: Fly-cut machine finish, diamond-turned machine finish, polished finish, and ball rolled. The samples were shock loaded by in-contact detonation of HE PBX-9501 on the front side of the metal coupons. Ejecta production at the back side or free side of the metal coupons was monitored using piezoelectric pins, optical shadowgraphy, and x-ray attenuation radiography.

Original language	English
Article number	083521
Journal	Journal of Applied Physics
Volume	103
Issue number	8
DOIs	https://doi.org/10.1063/1.2906107
State	Published - May 9 2008

Access to Document

10.1063/1.2906107

Cite this

Zellner, M. B., Vogan McNeil, W., Gray, G. T., Huerta, D. C., King, N. S. P., Neal, G. E., Valentine, S. J., Payton, J. R., Rubin, J., Stevens, G. D., Turley, W. D., & Buttler, W. T. (2008). Surface preparation methods to enhance dynamic surface property measurements of shocked metal surfaces. Journal of Applied Physics, 103(8), Article 083521. https://doi.org/10.1063/1.2906107

@article{7f5ee4e4721b4fb699320897a9c56170,

title = "Surface preparation methods to enhance dynamic surface property measurements of shocked metal surfaces",

abstract = "This effort investigates surface-preparation methods to enhance dynamic surface-property measurements of shocked metal surfaces. To assess the ability of making reliable and consistent dynamic surface-property measurements, the amount of material ejected from the free surface upon shock release to vacuum (ejecta) was monitored for shocked Al-1100 and Sn targets. Four surface-preparation methods were considered: Fly-cut machine finish, diamond-turned machine finish, polished finish, and ball rolled. The samples were shock loaded by in-contact detonation of HE PBX-9501 on the front side of the metal coupons. Ejecta production at the back side or free side of the metal coupons was monitored using piezoelectric pins, optical shadowgraphy, and x-ray attenuation radiography.",

author = "Zellner, \{M. B.\} and \{Vogan McNeil\}, W. and Gray, \{George Thompson\} and Huerta, \{D. C.\} and King, \{N. S.P.\} and Neal, \{G. E.\} and Valentine, \{Scott J\} and Payton, \{Jeremy Ronald\} and Jim Rubin and Stevens, \{G. D.\} and Turley, \{W. D.\} and Buttler, \{William Tillman\}",

year = "2008",

month = may,

day = "9",

doi = "10.1063/1.2906107",

language = "English",

volume = "103",

journal = "Journal of Applied Physics",

issn = "0021-8979",

publisher = "American Institute of Physics",

number = "8",

}

TY - JOUR

T1 - Surface preparation methods to enhance dynamic surface property measurements of shocked metal surfaces

AU - Zellner, M. B.

AU - Vogan McNeil, W.

AU - Gray, George Thompson

AU - Huerta, D. C.

AU - King, N. S.P.

AU - Neal, G. E.

AU - Valentine, Scott J

AU - Payton, Jeremy Ronald

AU - Rubin, Jim

AU - Stevens, G. D.

AU - Turley, W. D.

AU - Buttler, William Tillman

PY - 2008/5/9

Y1 - 2008/5/9

N2 - This effort investigates surface-preparation methods to enhance dynamic surface-property measurements of shocked metal surfaces. To assess the ability of making reliable and consistent dynamic surface-property measurements, the amount of material ejected from the free surface upon shock release to vacuum (ejecta) was monitored for shocked Al-1100 and Sn targets. Four surface-preparation methods were considered: Fly-cut machine finish, diamond-turned machine finish, polished finish, and ball rolled. The samples were shock loaded by in-contact detonation of HE PBX-9501 on the front side of the metal coupons. Ejecta production at the back side or free side of the metal coupons was monitored using piezoelectric pins, optical shadowgraphy, and x-ray attenuation radiography.

AB - This effort investigates surface-preparation methods to enhance dynamic surface-property measurements of shocked metal surfaces. To assess the ability of making reliable and consistent dynamic surface-property measurements, the amount of material ejected from the free surface upon shock release to vacuum (ejecta) was monitored for shocked Al-1100 and Sn targets. Four surface-preparation methods were considered: Fly-cut machine finish, diamond-turned machine finish, polished finish, and ball rolled. The samples were shock loaded by in-contact detonation of HE PBX-9501 on the front side of the metal coupons. Ejecta production at the back side or free side of the metal coupons was monitored using piezoelectric pins, optical shadowgraphy, and x-ray attenuation radiography.

UR - https://www.scopus.com/pages/publications/43049151120

U2 - 10.1063/1.2906107

DO - 10.1063/1.2906107

M3 - Article

SN - 0021-8979

VL - 103

JO - Journal of Applied Physics

JF - Journal of Applied Physics

IS - 8

M1 - 083521

ER -

Surface preparation methods to enhance dynamic surface property measurements of shocked metal surfaces

Abstract

Access to Document

Fingerprint

Cite this