TY - GEN
T1 - Thermo-mechanical characterization of silicone foams
AU - Rangaswamy, Partha
AU - Smith, Nickolaus Alexander
AU - Cady, Carl Mcelhinney
AU - Lewis, Matthew W
PY - 2015/1/1
Y1 - 2015/1/1
N2 - Cellular solids such as elastomeric foams are used in many structural applications to absorb and dissipate energy, due to their light weight (low density) and high energy absorption capability. In this paper we will discuss foams derived from S5370, a silicone foam formulation developed by Dow Corning. In the application presented, the foam is consolidated into a cushion component of constant thickness but variable density. The experimental methods necessary for the development of a material model will be discussed in detail. This mechanical material model Lewis (2013), predicts material response, in part, as a function of relative density. To determine the required parameters for this model we have obtained the mechanical response in compression for ambient, cold and hot temperatures. The mechanical response data showed extreme sensitivity to relative density. We also observed at strains corresponding to 1 MPa a linear relationship between strain and initial density for all temperatures. Samples taken from parts with a history of thermal cycling demonstrated a stiffening response that was a function of temperature, with the trend of more stiffness as temperature increased above ambient. Conversely, stiffness reduced as temperature decreased below ambient. This observation is in agreement with the entropic effects on the thermo-mechanical behavior of silicone polymers. In this paper we will present the experimental details, the testing protocol, analysis of test data, and a discussion of load (stress) and gap (strain) as a function of sample initial densities and temperatures.
AB - Cellular solids such as elastomeric foams are used in many structural applications to absorb and dissipate energy, due to their light weight (low density) and high energy absorption capability. In this paper we will discuss foams derived from S5370, a silicone foam formulation developed by Dow Corning. In the application presented, the foam is consolidated into a cushion component of constant thickness but variable density. The experimental methods necessary for the development of a material model will be discussed in detail. This mechanical material model Lewis (2013), predicts material response, in part, as a function of relative density. To determine the required parameters for this model we have obtained the mechanical response in compression for ambient, cold and hot temperatures. The mechanical response data showed extreme sensitivity to relative density. We also observed at strains corresponding to 1 MPa a linear relationship between strain and initial density for all temperatures. Samples taken from parts with a history of thermal cycling demonstrated a stiffening response that was a function of temperature, with the trend of more stiffness as temperature increased above ambient. Conversely, stiffness reduced as temperature decreased below ambient. This observation is in agreement with the entropic effects on the thermo-mechanical behavior of silicone polymers. In this paper we will present the experimental details, the testing protocol, analysis of test data, and a discussion of load (stress) and gap (strain) as a function of sample initial densities and temperatures.
UR - https://www.scopus.com/pages/publications/84959546951
U2 - 10.1201/b18701-121
DO - 10.1201/b18701-121
M3 - Conference contribution
SN - 9781138028739
T3 - Constitutive Models for Rubber IX - Proceedings of the 9th European Conference on Constitutive Models for Rubbers, ECCMR
SP - 689
EP - 696
BT - Constitutive Models for Rubber IX - Proceedings of the 9th European Conference on Constitutive Models for Rubbers, ECCMR
A2 - Marvalová, Bohdana
A2 - Petríková, Iva
PB - Unknown Publisher
T2 - 9th European Conference on Constitutive Models for Rubbers, ECCMR 2015
Y2 - 1 January 2015
ER -