Yield strength of cu and a CuPb alloy (1% Pb)

William Tillman Buttler; George Thompson Gray; Saryu Jindal Fensin; M. Grover; Michael Bruce Prime; G. D. Stevens; J. B. Stone; W. D. Turley

doi:10.1063/1.4971668

Yield strength of cu and a CuPb alloy (1% Pb)

William Tillman Buttler
, George Thompson Gray
, Saryu Jindal Fensin
, M. Grover
, Michael Bruce Prime
, G. D. Stevens
, J. B. Stone
, W. D. Turley

Los Alamos National Laboratory

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

5 Scopus citations

Abstract

With PBX9501 we explosively loaded fully annealed OFHC-Cu and an OFHC-CuPb (extruded with 1% Pb that ag- gregates at the Cu grain boundaries) to study the effects of the 1% Pb on the elastic-plastic yield Y of Cu. The yield-stress Y was studied through observation of surface velocimetry and total ejected mass ρ_A from periodic surface perturbations machined onto the sample surfaces. The perturbation's wavelengths were λ ≈ 65 μm, and their amplitudes h were varied to determine the wavenumber (2π= λ) amplitude product kh at which ejecta production for the Cu and CuPb begins, which relates to Y. The Y of the two materials is apparently different.

Original language	English
Title of host publication	Shock Compression of Condensed Matter - 2015
Subtitle of host publication	Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter
Editors	Ramon Ravelo, Thomas Sewell, Ricky Chau, Timothy Germann, Ivan I. Oleynik, Suhithi Peiris
Publisher	Unknown Publisher
ISBN (Electronic)	9780735414570
DOIs	https://doi.org/10.1063/1.4971668
State	Published - Jan 13 2017
Event	19th Biennial American Physical Society Conference on Shock Compression of Condensed Matter, SCCM 2015 - Duration: Jan 13 2017 → …

Publication series

Name	AIP Conference Proceedings
Volume	1793
ISSN (Print)	0094-243X
ISSN (Electronic)	1551-7616

Conference

Conference	19th Biennial American Physical Society Conference on Shock Compression of Condensed Matter, SCCM 2015
Period	01/13/17 → …

Access to Document

10.1063/1.4971668

Cite this

Buttler, W. T., Gray, G. T., Fensin, S. J., Grover, M., Prime, M. B., Stevens, G. D., Stone, J. B., & Turley, W. D. (2017). Yield strength of cu and a CuPb alloy (1% Pb). In R. Ravelo, T. Sewell, R. Chau, T. Germann, I. I. Oleynik, & S. Peiris (Eds.), Shock Compression of Condensed Matter - 2015: Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter Article 110005 (AIP Conference Proceedings; Vol. 1793). Unknown Publisher. https://doi.org/10.1063/1.4971668

Buttler, William Tillman ; Gray, George Thompson ; Fensin, Saryu Jindal et al. / Yield strength of cu and a CuPb alloy (1% Pb). Shock Compression of Condensed Matter - 2015: Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter. editor / Ramon Ravelo ; Thomas Sewell ; Ricky Chau ; Timothy Germann ; Ivan I. Oleynik ; Suhithi Peiris. Unknown Publisher, 2017. (AIP Conference Proceedings).

@inproceedings{4ccee9478745444ca05a3a2a23c384bb,

title = "Yield strength of cu and a CuPb alloy (1\% Pb)",

abstract = "With PBX9501 we explosively loaded fully annealed OFHC-Cu and an OFHC-CuPb (extruded with 1\% Pb that ag- gregates at the Cu grain boundaries) to study the effects of the 1\% Pb on the elastic-plastic yield Y of Cu. The yield-stress Y was studied through observation of surface velocimetry and total ejected mass ρA from periodic surface perturbations machined onto the sample surfaces. The perturbation's wavelengths were λ ≈ 65 μm, and their amplitudes h were varied to determine the wavenumber (2π= λ) amplitude product kh at which ejecta production for the Cu and CuPb begins, which relates to Y. The Y of the two materials is apparently different.",

author = "Buttler, \{William Tillman\} and Gray, \{George Thompson\} and Fensin, \{Saryu Jindal\} and M. Grover and Prime, \{Michael Bruce\} and Stevens, \{G. D.\} and Stone, \{J. B.\} and Turley, \{W. D.\}",

year = "2017",

month = jan,

day = "13",

doi = "10.1063/1.4971668",

language = "English",

series = "AIP Conference Proceedings",

publisher = "Unknown Publisher",

editor = "Ramon Ravelo and Thomas Sewell and Ricky Chau and Timothy Germann and Oleynik, \{Ivan I.\} and Suhithi Peiris",

booktitle = "Shock Compression of Condensed Matter - 2015",

note = "19th Biennial American Physical Society Conference on Shock Compression of Condensed Matter, SCCM 2015 ; Conference date: 13-01-2017",

}

Buttler, WT, Gray, GT, Fensin, SJ, Grover, M, Prime, MB, Stevens, GD, Stone, JB & Turley, WD 2017, Yield strength of cu and a CuPb alloy (1% Pb). in R Ravelo, T Sewell, R Chau, T Germann, II Oleynik & S Peiris (eds), Shock Compression of Condensed Matter - 2015: Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter., 110005, AIP Conference Proceedings, vol. 1793, Unknown Publisher, 19th Biennial American Physical Society Conference on Shock Compression of Condensed Matter, SCCM 2015, 01/13/17. https://doi.org/10.1063/1.4971668

Yield strength of cu and a CuPb alloy (1% Pb). / Buttler, William Tillman; Gray, George Thompson; Fensin, Saryu Jindal et al.
Shock Compression of Condensed Matter - 2015: Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter. ed. / Ramon Ravelo; Thomas Sewell; Ricky Chau; Timothy Germann; Ivan I. Oleynik; Suhithi Peiris. Unknown Publisher, 2017. 110005 (AIP Conference Proceedings; Vol. 1793).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Yield strength of cu and a CuPb alloy (1% Pb)

AU - Buttler, William Tillman

AU - Gray, George Thompson

AU - Fensin, Saryu Jindal

AU - Grover, M.

AU - Prime, Michael Bruce

AU - Stevens, G. D.

AU - Stone, J. B.

AU - Turley, W. D.

PY - 2017/1/13

Y1 - 2017/1/13

N2 - With PBX9501 we explosively loaded fully annealed OFHC-Cu and an OFHC-CuPb (extruded with 1% Pb that ag- gregates at the Cu grain boundaries) to study the effects of the 1% Pb on the elastic-plastic yield Y of Cu. The yield-stress Y was studied through observation of surface velocimetry and total ejected mass ρA from periodic surface perturbations machined onto the sample surfaces. The perturbation's wavelengths were λ ≈ 65 μm, and their amplitudes h were varied to determine the wavenumber (2π= λ) amplitude product kh at which ejecta production for the Cu and CuPb begins, which relates to Y. The Y of the two materials is apparently different.

AB - With PBX9501 we explosively loaded fully annealed OFHC-Cu and an OFHC-CuPb (extruded with 1% Pb that ag- gregates at the Cu grain boundaries) to study the effects of the 1% Pb on the elastic-plastic yield Y of Cu. The yield-stress Y was studied through observation of surface velocimetry and total ejected mass ρA from periodic surface perturbations machined onto the sample surfaces. The perturbation's wavelengths were λ ≈ 65 μm, and their amplitudes h were varied to determine the wavenumber (2π= λ) amplitude product kh at which ejecta production for the Cu and CuPb begins, which relates to Y. The Y of the two materials is apparently different.

UR - https://www.scopus.com/pages/publications/85016979705

U2 - 10.1063/1.4971668

DO - 10.1063/1.4971668

M3 - Conference contribution

T3 - AIP Conference Proceedings

BT - Shock Compression of Condensed Matter - 2015

A2 - Ravelo, Ramon

A2 - Sewell, Thomas

A2 - Chau, Ricky

A2 - Germann, Timothy

A2 - Oleynik, Ivan I.

A2 - Peiris, Suhithi

PB - Unknown Publisher

T2 - 19th Biennial American Physical Society Conference on Shock Compression of Condensed Matter, SCCM 2015

Y2 - 13 January 2017

ER -

Buttler WT, Gray GT, Fensin SJ, Grover M, Prime MB, Stevens GD et al. Yield strength of cu and a CuPb alloy (1% Pb). In Ravelo R, Sewell T, Chau R, Germann T, Oleynik II, Peiris S, editors, Shock Compression of Condensed Matter - 2015: Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter. Unknown Publisher. 2017. 110005. (AIP Conference Proceedings). doi: 10.1063/1.4971668

Yield strength of cu and a CuPb alloy (1% Pb)

Abstract

Publication series

Conference

Access to Document

Fingerprint

Cite this